Pulse header
★★★★★ Independently verified to IPMVP

Energy management system
that proves every saving

Pulse is the energy management system that monitors your energy consumption in real time to understand your usage before we propose a single change. Then we bring you the best possible option first, and show you the other ways.

Get a savings insight → Request a demo
powerhub PH-EMS-01 on-site three-phase energy meter with 4G connectivity
On-site 3-phase metering: Pulse
Every level of your estate — Pulse
What It Measures

Every level of your estate.

From the whole building down to a single plug.
Pulse sees it all, live, on one screen.

1 Level One

Main incomer

The whole building measured from one point.

412kW
Live demand · whole building
2 Level Two

Circuit level

Board by board, showing where the money goes.

Kitchen£182
HVAC£140
Lighting£96
Cellar£54
3 Level Three

Asset level

Individual equipment, down to a single plug.

31kW
Chiller
18kW
AHU 2
9kW
Oven
2kW
Ice mkr
1kW
Bar fdg
0.4kW
Plug 14
4 Level Four

All utilities

Gas, water and heat on the same dashboard as your electricity.

Electricity412 kW
Gas88 kW
Water1.2 m³
Heat63 kW
Verification — Pulse
Verification

We hold ourselves accountable to IPMVP.

You sign the baseline before anything changes. The dashboard then shows the gap between what you would have used and what you actually use. That gap is the saving, and it is verified continuously.

Baseline signed by you before anything changes.
Measured continuously on every circuit.
Reported monthly and checkable by anyone.
Verified client reference
"We needed savings we could put on a balance sheet, not a brochure. Powerhub Pulse gave us numbers our auditors signed off without a comma changed."
Finance Director, national hospitality group.
app.powerhubpulse.com
LIVE
Verified savings
Signed baseline · verified continuously to IPMVP
14.2%Saved
412 MWhBaseline
354 MWhActual
Baseline
412 MWh
Signed by client
Actual
354 MWh
14.2% lower
Saved
14.2 %
Verified
Baseline vs actualRolling 12 months
14.2% saved
JanAprJulNow
Our hardware — Pulse
Our hardware

No gateways. No WiFi.
No dropouts.

Our transmission covers whole sites and estates with no gateway, no WiFi and no added connection. Every device is powered from the supply it measures, so it never goes quiet.

Nothing to install on your network. No gateway, no WiFi, no IT tickets.
Powered from the supply it measures, so it never drops off.
Covers whole sites and estates on one transmission.
Pulse · Three‑phase meter
Pulse energy management system

Measurement Accuracy

±0.2% Voltage
±0.1% Current

Communication

RS485 Modbus-RTU
Up to 115,200 bps

Harmonic Analysis

Orders 1–50
Voltage & Current

Alex at Powerhub
Rather just talk it through?

Book 30 minutes with Alex. He'll look at your setup and give you a straight answer.

Book a chat with one of our experts
The Platform

Your whole estate on one screen.

app.powerhub.solutions
pulse./Energy Overview
LIVEPH
Voltage Optimisation · active since Jan 2024
Your verified savings
£52.40Cost saved today
210 kWhEnergy saved today
42 kgCO2 avoided
Energy cost saved
£52
+14% vs last week
Energy saved
210 kWh
+9% vs last week
Carbon avoided
42 kg
3 trees daily
Frequency50.0 Hz
Power factor0.98
Peak demand438 kW
Daily energy savingskWh saved · live view
16.4% below baseline
00:0006:0012:0018:00NOW
Temperature warning · Walk-in Fridge 2, Manchester Central, 4.8°C (limit 4°C)
Energy spike · Birmingham Metropole, 23% above baseline since 09:40
Where Pulse Sits

The intelligence layer in your energy management system.

Your systems use energy, our hardware cuts how much. Pulse is the software layer across it all: measuring every site in real time, proving the savings and giving you the full picture.

01
Layer 01
Your Estate
The systems already consuming energy across your sites.
Systems you run today HVAC Refrigeration Lighting Process Load Submeters
02
Layer 02
Powerhub Hardware
Physical kit we install to cut how much that estate uses.
What we install Voltage Optimisation Power Factor Correction Power Quality KBR Refrigeration Controls Solar PV Pulse Control
03
Layer 03 · The Intelligence
Pulse
The one layer that touches all the others, measuring, verifying and controlling everything in real time.
What Pulse does with it all Monitoring Measurement & Verification Control Reporting Alerts
04
Layer 04
You
The people who see the savings and act on the numbers.
Who Pulse reports to Finance Director Sustainability Lead Energy Manager Procurement Operations

The result: one place to see every kilowatt you use and every pound you save, proven and reported for you.

Live in 14 days — Pulse
Live in 14 days

From first call to live data in 14 days.

No long project. Send your data, sign the baseline, and Pulse is live and verified.

01Day 1

Free data audit

Send your half-hourly data and get a savings proposal back within 24 hours.

02Days 2 to 5

Baseline signed

We lock an IPMVP baseline, so savings are guaranteed rather than estimated.

03Install day

Fitted in a day

Non-invasive clamps and gateways, no shutdown, fitted by our own engineers.

04Same day

Live and verified

Pulse goes live, with every saving tracked and reported from day one.

See your number

A first look at your savings.

One of our experts
Talk to us

See it on your own numbers.

Book a 30 minute demo and one of our experts will show you the Pulse energy management system running on your estate.

Request a demo
FAQ preview

What our clients ask first.
What is an Energy Management System (EMS)?

An EMS is software and hardware that helps a business monitor, control and reduce its energy consumption. Powerhub Pulse is exactly that. A full Energy Management System  aligned to ISO 50001, adding measurement and verification to IPMVP standard along with remote asset control, and while most platforms in the UK market do one or two of these, Pulse does all four.

How does Powerhub verify the savings?

IPMVP is the International Performance Measurement and Verification Protocol, the global standard for verifying energy savings, and Powerhub Pulse is the only UK EMS that delivers IPMVP Option A, B and C measurement plans as standard

This matters because savings that are not measured to IPMVP cannot be put on a balance sheet, used as compliance evidence, or trusted in an exit data room. Without IPMVP your savings are only claims, whereas with IPMVP they are proof.

What reporting does Powerhub Pulse generate?

Pulse collects live energy data across every site and circuit, month by month, and that data forms the verified energy baseline your team needs for any reporting obligation. Pulse Compliance, launching September 2026, will use the same data layer to support a range of regulatory reporting requirements.

Does Pulse work with my existing Building Management System (BMS)?

Yes, Pulse uses an open API with Modbus, BACnet and LoRaWAN support, so it bolts onto your existing BMS, finance system or facilities platform  without ripping out what you already have. There is no lock in or proprietary protocol, and you can run Pulse alongside your current setup or use it standalone.

How quickly can Powerhub Pulse be deployed?

Pulse is typically deployed in 14 days from signed proposal. Our own team of 14 engineers install the CT clamps and LoRaWAN gateway in one day per site with no production shutdown, and the platform goes live the same day.

What size businesses use Powerhub Pulse?

Any UK business spending £50,000 or more per year on energy is a fit. Our customers include multi site estates in hospitality (Greene King, Thwaites), hotels (Mercure, RBH Hospitality), food manufacturing, retail, healthcare, leisure (Tees Active) and industrial sectors.

Still have a question we haven't covered?

Talk to the team